Jumpdrive Script by GamePlayer

Creator

The creator of the code is GamePlayer.

Links

About JumpDrive: https://pandorabox.io/index.php/Jumpdrive

Informations

Hello all! I recently wrote a code to the luacontroller to control Jumpdrive. The code and the micro tutorial below. This is open-source code and free. Default digiline channel is "jumpdrive". Version: 1.0 Have fun!

JumpDrive settings X, Y, Z

This is block to set JumpDrive. For example: jd_set(<x coords>, <y coords>, <z coords>)

local function jd_set(jdx, jdy, jdz)
digiline_send("jumpdrive", {command="set", key ="x", value=jdx})
digiline_send("jumpdrive", {command = "save"})
digiline_send("jumpdrive", {command="set", key="y", value=jdy})
digiline_send("jumpdrive", {command = "save"})
digiline_send("jumpdrive", {command="set", key="z", value=jdz})
digiline_send("jumpdrive", {command = "save"})
end

JumpDrive - jump block

For example: jd_jump()

local function jd_jump()
digiline_send("jumpdrive", {command="jump"})
end

JumpDrive - show block

For example: jd_show()

local function jd_show()
digiline_send("jumpdrive", {command="show"})
end

JumpDrive - save block

For example: jd_save()

local function jd_save()
digiline_send("jumpdrive", {command = "save"})
end

GetSpace - Stable JD Code

To run this code you need: luacontroller x1, jumpdrive x1, keyboard x1, LCD (or something else) x1, some digilines. Default channel for keyboard: "kb" Default channel for LCD: "LCD" Default channel for JumpDrive: "jumpdrive" Commands to keyboard:

jd_jump - Jump command
jd_set - Setuping coords: enter the command and X,Y,Z separately
jd_scan - Scaning (searching) asteroids, only you must set X and Z in jd_set
jd_stop - Stoping scaning asteroids
jd_y - setuping Y position, enter the command and Y separately

Code:

local function jd_save()
digiline_send("jumpdrive", {command = "save"})
end
local function jd_set(jdx, jdy, jdz)
digiline_send("jumpdrive", {command="set", key ="x", value=jdx})
digiline_send("jumpdrive", {command = "save"})
digiline_send("jumpdrive", {command="set", key="y", value=jdy})
digiline_send("jumpdrive", {command = "save"})
digiline_send("jumpdrive", {command="set", key="z", value=jdz})
digiline_send("jumpdrive", {command = "save"})
end
local function jd_jump()
digiline_send("jumpdrive", {command="jump"})
end
local function jd_show()
digiline_send("jumpdrive", {command="show"})
end
if(event.type == "digiline" and event.channel == "kb" and mem.jdset == "3") then
mem.z = event.msg
mem.jdset = "0"
digiline_send("jumpdrive", {command = "set", key = "z", value = event.msg})
jd_save()
end
if(event.type == "digiline" and event.channel == "kb" and mem.jdset == "2") then
mem.y = event.msg
mem.jdset = "3"
digiline_send("LCD","JD >> Z:")
digiline_send("jumpdrive", {command = "set", key = "y", value = event.msg})
jd_save()
end
if(event.type == "digiline" and event.channel == "kb" and mem.jdset == "1") then
mem.x = event.msg
mem.jdset = "2"
digiline_send("LCD","JD >> Y:")
digiline_send("jumpdrive", {command = "set", key = "x", value = event.msg})
jd_save()
end
if(event.type == "digiline" and event.channel == "kb" and event.msg == "jd_set") then
mem.jdset = "1"
digiline_send("LCD","JD >> Set coordinates (X Y Z):")
digiline_send("LCD","JD >> X:")
end
if(event.type == "digiline" and event.channel == "kb" and event.msg == "jd_jump") then
digiline_send("LCD","JD >> Starting jump!")
jd_jump()
end
if(event.type == "digiline" and event.channel == "kb" and event.msg == "jd_scan") then
digiline_send("LCD","JD >> Wait...")
mem.startscan = "1"
mem.scanf = "1"
end
if(event.type == "digiline" and event.channel == "jumpdrive" and event.msg.success) then
digiline_send("LCD","JD >> Jump done!")
end
if(event.type == "digiline" and event.channel == "kb" and event.msg == "jd_stop") then
mem.scanf = "0"
digiline_send("LCD","JD >> Scan canceled!")
end
if(mem.scanf == "2") then
if(event.type == "digiline" and event.channel == "jumpdrive") then
if(event.msg.success) then
digiline_send("LCD","JD >> Asteroid detected!")
mem.scanf = "0"
digiline_send("LCD", "JD >> Y: "..mem.scany)
digiline_send("jumpdrive", {command = "set", key = "y", value = mem.scany})
digiline_send("jumpdrive", {command = "save"})
else
mem.scany = mem.scany + 25
mem.scanf = "1"
end
end
end
if(mem.scanf == "1") then
if(mem.startscan == "1") then
mem.scany = 6000
mem.startscan =  "0"
mem.postep = 0
end
mem.postep = mem.postep + 1
digiline_send("LCD", mem.postep.." na 80")
jd_set(mem.x, mem.scany, mem.z)
jd_show()
mem.scanf = "2"
if(mem.postep == 80) then
digiline_send("LCD","JD >> Asteroid not founded!")
mem.scanf = "0"
end
end
if(event.type == "digiline" and event.channel == "kb" and event.msg == "jd_y") then
digiline_send("LCD","JD >> Y: ")
mem.setdefa = "1"
end
if(mem.setdefa == "1") then
if(event.type == "digiline" and event.channel == "kb") then
mem.setdefa = "0"
mem.y = event.msg
digiline_send("jumpdrive", {command = "set", key = "y", value = mem.y})
digiline_send("jumpdrive", {command = "save"})
end
end